Testbusters.net
Testbusters.net
Guaranteed Pass!
We're here to help!
Test Questions
Fault Tolerance with RAID (Redundant Array of Inexpensive Disks)
RAID 5: Stripe Set with parity uses a minimum of 1 controller and a minimum of 3 hard disks, with a maximum of 32 disks.
An example of it’s fault tolerant ability would be if you were using 3 drives. Data is written in stripe sets across all three drives, and if a drive fails the data (parity) information from the other 2 good drives will be used to rebuild the data on the newly replaced drive.
Copyright ©2002-2007 Testbusters.net. All Rights Reserved.
Testbusters.net is not sponsored, endorsed or affiliated by any associated vendor.
Associated venders include, but are not limited to, Microsoft®, Cisco®, CompTIA®, Novell® etc.
